View Demo
[spacer image]
[spacer image]
Products Home
[spacer image]
WIT Kit
[spacer image]
Wireless Sensors
[spacer image]
Industrial Wireless Sensors Temperature Sensor Temp Sensor with Probe High Temp Sensor Low Temp Sensor Humidity Sensor (HA) Grains Per Pound Sensor Water Sensor ID Sensor Dry Contact Sensor Light Sensor Open/Closed Sensor Magnetic Sensor Activity Sensor Accelerometer Vehicle Presence Sensor 0-20mA Current Sensor Analog Voltage Sensor 120 Volt Detect Sensor 240 Volt Detect Sensor 500 Volt Measure Sensor Compass Sensor Pressure Sensor
[spacer image]
Wireless Gateways
[spacer image]
Monitoring Software
[spacer image]
Service Notification Systems
[spacer image]
Accessories
[spacer image]
Monnit Industrial Wireless 0-20 mA Current Sensor   Buy Industrial 0-20 mA Current Sensors!

Monnit Industrial 0-20 mA Current Sensor

Monnit's industrial wireless 0-20mA current sensor is capable of measuring the current off another device or sensor, up to 20mA (DC), by connecting the leads on the Monnit WIT 0-20mA Current sensor to the positive and ground terminals of the device being measured. Examples of interfacing devices include, but are not limited to: Current transducers (CTs) with outputs up to 20 mA, pH sensor, dissolved oxygen sensor, pressure sensor, magnetic flow meters, velocity or acceleration sensors, industrial vibration sensors, industrial accelerometers, any kind of sensor that specifies the output is in (mA) within the range of 0 – 20.
Monnit Industrial WIT Wireless Sensor Specifications
  • 900, 868 and 433MHz operating frequencies
  • External 2dBi or 3dBi RP SMA antenna (included)
  • 300 - 350 ft. non-line-of-sight device range*
  • Up to 5 year battery life.**
    (Replaceable, single AA, 2500mAH, 3.6V battery)
  • Operating temperature: -40° to 85°C (-40° to 185°F)
  • IP65 NEMA 4X, CE rated, sealed, weatherproof enclosure.

  • Interfaces with sensors between 0-20 mA.

* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting
    frequency and other variables.

WARNING: Use caution when interfacing to the Monnit Industrial 0-20mA Current sensor. Negative voltages, any kind of AC Voltages, or DC Voltage exceeding 3.6V WILL DAMAGE the electronics of the device. Monnit is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.

Monnit Industrial Sensors with Solar Power Option

Need Longer Battery Life?

Monnit Industrial Wireless Sensors are also available with a solar power cell. The solar powered sensors use a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 5 years.

  • Keeps battery charged and at optimal capacity
  • Extends the life of the included rechargable battery
  • Great for outdoor monitoring
 Monnit Industrial Sensor with Solar Option