View Demo
[spacer image]
[spacer image]
Products Home
[spacer image]
WIT Kit
[spacer image]
Wireless Sensors
[spacer image]
Industrial Wireless Sensors Temperature Sensor Temp Sensor with Probe High Temp Sensor Low Temp Sensor Humidity Sensor (HA) Grains Per Pound Sensor Water Sensor ID Sensor Dry Contact Sensor Light Sensor Open/Closed Sensor Magnetic Sensor Activity Sensor Accelerometer Vehicle Presence Sensor 0-20mA Current Sensor Analog Voltage Sensor 120 Volt Detect Sensor 240 Volt Detect Sensor 500 Volt Measure Sensor Compass Sensor Pressure Sensor
[spacer image]
Wireless Gateways
[spacer image]
Monitoring Software
[spacer image]
Service Notification Systems
[spacer image]
Accessories
[spacer image]
Monnit Industrial Wireless Pressure Sensor   Buy Industrial Wireless Pressure Sensors!

Monnit Industrial Pressure Sensor

Monnit's industrial wireless pressure sensor is capable of measuring gas, liquid or vapor pressures from 0-160 PSI. This sensor can be used anywhere a pressure gauge can be used. Requires 12 – 32 VDC input. This solution combines a standard pressure transducer interfaced to a Monnit Wit wireless radio. The Pressure Transducer is NEMA 4X, CE rated. User customization allows you to set notifications and alerts from the system so you can know immediately if pressure is above or below an optimal range.
Monnit Industrial WIT Wireless Sensor Specifications
  • 900, 868 and 433MHz operating frequencies
  • External 2dBi or 3dBi RP SMA antenna (included)
  • 300 - 350 ft. non-line-of-sight device range*
  • Up to 5 year battery life.**
    (Replaceable, single AA, 2500mAH, 3.6V battery)
  • Operating temperature: -40° to 85°C (-40° to 185°F)
  • IP65 NEMA 4X, CE rated, sealed, weatherproof enclosure.

  • Works with Gas, Liquid or Vapor.
  • 0-160 PSI Rating.
  • Transducer is NEMA 4X, CE Rated.

* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting
    frequency and other variables.

Pressure Sensor Specifications  
Performance 0.7% BFSL Accuracy
Storage Temperature -40 to 221ºF (-40 to 105ºC)
Operating Temperature -40 to 185ºF (-40 to 85ºC)
Thermal Effect on Reading 2% per 100 ºF
Noise Immunity 20V/m (meets CE heavy industrial)
Media Gas, Liquid or Vapor
Electrical Protection Reverse polarity 75Vdc, Over-voltage 60 Vdc, and short-circuit protection
Vibration 5g's from 50 to 2000Hz.
Humidity 95% non-condensing
Response Time Less than 2 ms (electronics)
Wake-up Time: Less than 2 ms
Insulation 1 Meg ohm at 200 Vdc
Wire Length: 1 Meter shielded cable (between gauge and wireless unit)
Dial Size 2 1/2" (63 mm)
Gauge Accuracy 1.6% full-scale Grade A (63mm)
Process Connection ¼" NPT-Male Standard
Proof Pressure 0 to 160 psi = 120% of full scale
Burst Pressure 0 to 160 psi = 10x of full scale
Window Polycarbonate or Safety Glass
Case 304 Series Stainless Steel
Socket and Tube 316 Series Stainless Steel
Gauge Movement Suppressed Stop Movement for True Electrical Zero Reading

Monnit Industrial Sensors with Solar Power Option

Need Longer Battery Life?

Monnit Industrial Wireless Sensors are also available with a solar power cell. The solar powered sensors use a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 5 years.

  • Keeps battery charged and at optimal capacity
  • Extends the life of the included rechargable battery
  • Great for outdoor monitoring
 Monnit Industrial Sensor with Solar Option