Wireless Pulse Counter - Multi Input

The wireless multi input pulse counter can be integrated with up to four separate dry contact or mechanical switch and closure devices to count the number of actuations occuring within a given time frame. Also available in a single-input version.

900, 868 and 433MHz operating frequencies
250 - 300 ft. non-line-of-sight device range*
Robust sensor housing.
2 replaceable AA 1.5V batteries.
At 1 hour heartbeat setting, included AA
batteries will last more than 4 Years. **

Counts number of pulses in given time frame.
(Counter does not aggregate pulses, but resets to
zero, reporting each pulse as an individual event.)
Support up to four seperate inputs.
Product comes with standard 36in wires.

* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting
frequency and other variables.

What does this wireless sensor's data look like in software?

iMonnit Software - Multi-Pulse Counter Data Example

Pulse Counter Specifications

Supply Voltage	2.0 - 3.6 V

Current Consumption	0.7 μA (sleep mode) 2 mA (radio idle/off mode) 2 mA (measurement mode) 25 mA (radio RX mode) 35 mA (radio TX mode)

Max Operating Temperature (Board and Circuitry)	-7°C to +60°C ( -4°F to +140°F )

Optimal Battery Temperature Range	+10°C to +50°C ( +50°F to +122°F )



Pulse Counter Specifications

Number of Inputs / Counters	4

Counter Bit Depth	16 bit

Detection Wires	High Impedance (5-Wire)

Counter Operation	Positive and / or Negative Edge Pulses

Transition Counting	Does Not Count Transitions)

Compatibility	Open Collector NPN Switches Mechanical Switches

Transactions per Counter Input	65,000 Max / Heartbeat (Transmission)

Max Input Pulse Rate	20 Hz (20 / second) (4 or less / second recommended) *

Lead Wire Length	3 ft. ( 36 in.)

* High pulse count rates can severely impact battery life.

The Leader in Low Cost Monitoring Solutions

Wireless Pulse Counter - Multi Input

What does this wireless sensor's data look like in software?