Sign-up for a free webinar
  • Support
  • software
  • Troubleshooting a Wi-Fi Sensor using the MoWi Console Tool

Troubleshooting a Wi-Fi Sensor using the MoWi Console Tool

If you are having trouble connecting your Wi-Fi sensor or keeping it connected to your Wi-Fi router, try the steps below to see if the port is open for communication from your sensor to our server. Close the MoWi Setup Utility if it is open.

  • First, please open a browser and go to and click the link MoWi ConsoleTool under “MoWi Tools”.
  • You will need to extract the files and probably want to extract them to your desktop (in a new folder); it will make it easier to access.
  • Remove the batteries from the Wi-Fi sensor for one minute.
  • Open the console tool by double clicking the icon in the folder you just created.
  • Plug the cable into the computer and into the sensor.
  • Insert the batteries.
  • You should see a window like the one below. 

Wi-Fi Console Tool

  • Click “Refresh Ports”.  Then click the port drop down and make sure you choose the correct port.
  • Click “Open Port”.
  • You should now see the following (with your COM port chosen):

Com Port

  • Click “(Re)Connect Console”.
  • Click “Configure Sensor”.
  • A pop up window should appear with the current configuration settings for your Wi-Fi sensor.  Make sure your SSID, Security Type and Password are all correct (consider all fields case-sensitive). The “Server Address” should be and the Server Port should be 3000. 

Wi-Fi Config

  • Click “Save”.
  • Click “(Re)Connect Console”.
  • Click “Run Gateway”.
  • You should see a lot of text specific to your network and your sensor and you should have one message which looks like this:


If you see any errors, if the message is “Not Associated” or “Failed”, please click “(Re)Connect Console”, then click “Recover Sensor”. This creates a file which can be sent to us for review or research.  We can use the information in that file to help us determine the cause of the connection failure.