• Monnit Industrial Wireless Voltage Meters - 0-10 VDC
Monnit Industrial Wireless Voltage Meters - 0-10 VDC

$169.00
Part #
MNS-4-IN-VM-010
Region | Frequency
Not Selected - * Region Required
Product Variations
Quantity
Customize

Description

Monnit industrial wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 10 VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.

Examples of interfacing devices include, but are not limited to: Strain Gauge, Pressure Transducer, RTD, Thermistor, or Thermocouple, Piezo Electric sensors, Photoresistor, Industrial Accelerometer, any kind of variable resistor, any kind of sensor that outputs a voltage, etc. If the device being measured is passive, the user must supply their own excitation voltage, as the Monnit sensor is really just a “voltage observer”. Cannot be used for AC voltage measurement.

Monnit Industrial Sensors come in an IP65, NEMA 4X, CE rated, sealed, and weatherproof enclosure. They are powered by a single, replaceable, Industrial grade 3.6 V battery (included).

An optional solar powered version is also available. The solar powered version includes a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 5 years.



 

WARNING: Use caution when interfacing to the Monnit Wireless Voltage Meter. Negative voltages, any kind of AC Voltages, or DC Voltage exceeding 20V WILL DAMAGE the electronics of the Monnit Wireless Sensor. Monnit is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.


Features

  • Max sensor input voltage up to 20 volts DC (will return a max of 10 volts in software)
  • Interfaces with other devices up to 10 volts DC

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.


Data Snapshot

Monnit Wireless Voltage Meters - 10 VDC - Data View in Software

In the Box

  • Wireless Sensor
  • Mounting Hardware
  • 3V Industrial Battery (Pre-Installed)
  • SMA Antenna
 

Voltage Meter Specifications

Voltage Range 0 – 10 Volts DC
Resolution ~5 mV
User Calibrated Accuracy +/- .5% FS
Open Circuit Voltage ~0.000 Volts
Maximum Rated Input Voltage 20 Volts
Lead Wire Length 2 Wires, 1 ft. ( 12 in.), Red (+), Black (-), 18 AWG (Custom lengths available upon request)
Weight 5.0 oz.
Voltage Resolution 0.01 VDC
Accuracy @ 25°C @1V or above: +/- 1% (0.5% typical)
@500mV: +/- 2% typical
@250mV: +/- 4% typical
@150mV: +/- 7% typical
Minimum Voltage Detected 150mV
 

Industrial Specifications

Dimension 3.7 in x 2.32 in x 1.38 in
Max Operating Temperature -40° to 85°C (-40° to 185°F)
Device Range 300 - 350 ft. non-line-of-sight device range*
Supply Voltage 2.0 - 3.6 V
Battery Type Replaceable 3.6V, 1800mAH (single AA sized)
Optimal Battery Operating Temperature +10°C to +50°C (+50°F to +122°F)
Battery Life Up to 7 Year Battery Life.**
Solar Power Option 5 VDC Solar Panel
600 mAH Rechargeable Battery (>2000 Charge Cycles - 80% of Initial Capacity)
Charging Temperature Range: 0° to 45°C (32° to 113°F)
Max Temperature Range: -20° to 60°C (-4° to 140°F)
Enclosure Material IP65, NEMA 4X, CE rated, sealed, weatherproof enclosure
UL Rating UL Listed to UL508-4x specifications (File E194432)
 

433 MHz Specifications

Operating Frequency 433 MHz Operating Frequency
Certifications CE Certified and Complies with CISPR 22:2008-09 / EN 55022:2010 - Class B and ETSI EN 300 220-2 V2.4.1 (2012-05)
Specifications Image

Suggested Application Uses for This Sensor

  • Battery Health
  • Voltage Measurement
  • Transducer Measurement
  • Machinery
  • Electrical Motors