The Monnit Voltage Detector - 200 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 200 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage".
ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,200+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.
Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.
Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.
Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.
Monnit ALTA Industrial Sensors come in an IP65, NEMA 4X, CE rated, sealed, and weatherproof enclosure. They are powered by a single, replaceable, Industrial grade 3.6 V battery (included).
An optional solar powered version is also available. The solar powered version includes a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 8-10 years.
Voltage Detection Sensor Specifications
|Maximum Rated Input Voltage||200.0 Volts|
|Minimum Rated Input Voltage||-200.0 Volts|
|Voltage Detection Threshold||Present above ~2 VDC, Absent below ~1.8 VDC (Indeterminant from 1.8 to 2 VDC)|
|Trigger||Transmits data upon state change|
|Open Circuit Reading||Voltage absent|
|Response Time||~2 Seconds|
|Lead Wire Length||2 Wires, 1 ft (12 in), Red (+), Black (-), 22 AWG|
ALTA Industrial Specifications
|Supply Voltage||2.0 - 3.8 VDC|
|Battery Type||Replaceable 3.6V, 1800mAH (single AA sized)|
|Battery Life||Up to 10 Year Battery Life.**|
|Max Operating Temperature||-40° to 85°C (-40° to 185°F)|
|Optimal Battery Operating Temperature||+10°C to +50°C (+50°F to +122°F)|
|Solar Power Option||3.0 VDC Solar Panel
600 mAH Rechargeable Battery (>2000 Charge Cycles - 80% of Initial Capacity)
Charging Temperature Range: 0° to 45°C (32° to 113°F)
Max Temperature Range: -20° to 60°C (-4° to 140°F)
|Enclosure Material||IP65, NEMA 4X, CE rated, sealed, weatherproof enclosure|
|UL Rating||UL Listed to UL508-4x specifications (File E194432)|
|Dimension||3.7 in x 2.32 in x 1.38 in|
ALTA 900 MHz Specifications
|Operating Frequency||900 MHz Operating Frequency|
|Certifications||Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-G2SC1)
Complies with Industry Canada standards. (IC: 9794A-G2SC1)
|Device Range||Device Range Up to 1,200 ft. non-line-of-sight, wireless device range*|
|Security||Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)|