Find exactly what you need...

...or just narrow it down a bit



Wireless Range Extenders
Description:

Monnit wireless range extenders allow you to extend the coverage area of your wireless sensor network by relaying the signals between your wireless sensors and the wireless gateway.



Wireless Control
Description:

Monnit Wireless Control allows a user to control two separate power relays, all through the iMonnit online sensors portal. Automatically control motors or electrical devices when a condition is detected by a sensor or group of sensors. Relays can also be controlled manually through the online portal or mobile app.



Wireless Serial Data Bridge
Description:

Monnit's new Wireless Serial Data Bridge is a bidirectional serial to radio device capable of transmitting serial data over its wireless communication link and delivering wireless data, received in the radio, out of its serial port. The Monnit wireless serial data bridge can be connected to any device equipped with a serial data port to capture the data and transmit it to the iMonnit online sensor monitoring and Notification System. The data is stored in the online system and can be reviewed and exported as a data sheet or graph.

Note: Interface type must be selected at time of purchase. Available for RS232 or RS485 serial interfaces. Requires a MonnitLink wireless gateway for communication with software.



Wireless Local Alert
Description:

The Monnit Wireless Local Alert provides an additional way to receive critical notifications and sensor readings through your iMonnit network. Upon receiving a notification the Local Alert can flash an LED, sound an audible alarm, and display critical notification information. The Local Alert can also be used to display sensor readings from any sensor on the same account.

When choosing to send a notification to the Local Alert, the user can choose what the device should do when it receives the notification. A notification can be programmed to flash the LED light, sound an audible alarm, display text on the LCD screen, or any combination of these features.



Thermostat
Description:

Monnit's smart thermostat is different than typical thermostats found today, as it is designed specifically for remote configuration. There are no manual adjustment buttons which prevents the cooling or heating system from being tampered with or left in an energy wasting state. It also features an integrated motion sensor to auto detect if the area is occupied or not. The system allows you to set a max and min temperature range for both occupied and non-occupied statess. This is a perfect solution for remote buildings that are typically unoccupied, as the system will auto adjust comfort levels when personnel arrive and automatically return to normal when they leave. It is also great for corporate buildings, schools and churches to prevent random adjustments by unauthorized people and auto detect occupants to adjust comfort levels. It also provides cost savings by allowing the cooling or heating system go into a power saving mode if an area is not in use.