Sign-up for a free webinar

ALTA Wireless Voltage Detection - 50 VDC - AA Battery Powered

  • ALTA Wireless Voltage Detection - 50 VDC - AA Battery Powered

Also Available As:

Information

Format
Frequency
900 MHz
Part#
MNS2-9-W2-VD-DC
Voltage
Power
Not Interested?   Return to the Standard Product

The Monnit Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage".

Resellers and OEMs call 1-877-561-4555 to order.

Customers looking for a reseller or more information call 1-801-561-5555.

Product Description

The Monnit Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage".

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.

The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage.

Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.



Product Features

  • Interfaces with other devices or power lines up to 50 volts DC.
  • Max sensor input voltage up to 50 volts DC.

What does this wireless sensor's data look like in software?

Wireless Voltage Detection - 50 VDC - Data View in Software

What's in the box?

  • Wireless Sensor
  • Mounting Hardware
  • 2 x AA Batteries
 

Voltage Detection Sensor Specifications

Maximum Rated Input Voltage Up to 50 Volts DC
Minimum Rated Input Voltage -50.0 Volts
Voltage Detection Threshold Present above ~.47 Volt, Absent below ~.47 Volt
Trigger Transmits Data on State Change
Open Circuit Reading Voltage Absent
 

ALTA AA Specifications

Battery Type 2 Replaceable AA 1.5 V Batteries
Dimension 4.375 in x 2.470 in x 1.12 in
Supply Voltage 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply)
Battery Life At 1 hour heartbeat setting, included AA batteries will typically last 6-8 Years. **
Max Operating Temperature Using AA Alkaline -18°C to 55°C (0°F to 130°F)
Max Operating Temperature Using AA Lithium -40°C to 60°C (-40°F to 140°F)
Optimal Battery Operating Temperature +10°C to +50°C (+50°F to +122°F)
Enclosure Material ABS
 

ALTA 900 MHz Specifications

Operating Frequency 900 MHz Operating Frequency
Device Range Up to 1,000 ft. non-line-of-sight, wireless device range*
Security Diffie-Hellman Key Exchange + AES-128 CBC
Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-G2SC1)
Complies with Industry Canada standards. (IC: 9794A-G2SC1)

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.


Specifications Image

Suggested Application Uses for This Sensor

  • Appliance monitoring
  • Sprinkler system monitoring
  • HVAC system monitoring
  • Line power monitoring
  • Power coupling monitoring
  • Power supply monitoring
  • Sump pump monitoring


Customers