The following steps will guide you through the process of moving wireless gateways and sensors from one network to another in your iMonnit account. The process to move a gateway or sensor is to simply add the device to the network you want it on. By adding a gateway or sensor to a new network, it will automatically be removed from the old network.

1. Moving Wireless Gateways.
• Choose “My Account/Settings” from the main navigation.
• From left navigation choose “Network Settings”.
• Select the network you would like to move the gateway to.
• Find the bottom of the section “Gateway List / Add a Gateway”.
• Enter the Gateway ID and Security Code from the gateway you want to move to the network.
• Press “Register Gateway”.

Create New Account

2. Moving Wireless Sensors.
• Choose “My Account/Settings” from the main navigation.
• From left navigation choose “Network Settings”.
• Select the network you would like to move the sensor to.
• Find the bottom of the section “Sensor List / Add a Sensor”.
• Enter the Sensor ID and Security Code from the sensor you want to move to the network.
• Press “Register Sensor”.
• Repeat this process to add more sensors to this network.
• Power cycle the gateway to update the gateway’s stored sensor list.

Account Information

For more information on using Monnit wireless sensors, visit the support section of our website.