Sensor Calibration Certificate
iMonnit, sensor, certification, calibration,
Guide to creating a calibration certificate in iMonnit.
Creating a sensor calibration certificate will mask the calibration tab from those who should not have permissions to adjust these settings. Permissions for self certifying a calibration must be enabled in user permissions.
- You will need to verify that you have permission to create a certification before launching into the process. Do this by navigating up to the account menu and selecting "User List."
- Locate your account in the list. If you have a basic account, your name as the primary account holder will be the only one on the list. The availability of mulitiple users registered to one account is a feature only available on iMonnit Premiere.
- Once in your account page, choose the User Permissions tab.
- Verify that the checkbox for "Can Create Calibration Certificate" is checked. If the box is empty, check it and be sure to select the "Save" button before moving on.
- Find "Sensors" in the main navigation menu.
- Select a sensor from the list.
Only sensors that can be calibrated are available for creating a certificate. For example, a temperature sensor. You will know whether a sensor can be calibrated by the presence of a calibration tab.
- Choose the Calibrate Tab in the bar.
- Navigate down to Calibrate Sensor section. Directly below the calibrate button is the selection to "Create Calibration Certificate."
- Selecting "Create Calibration Certificate" will open the form to create your certificate.
A. The Calibration Facility Field will automatically be filled. Select the drop down menu to change your facility.
B. The date for "Certificate Valid Until" must be set one day in the future after the date contained in the "Date Certified" field.
C. "Calibration Number" and "Calibration Type" are unique values to your certificate.
D. Choose the "Save" button before moving on.
- When the new certificate is accepted, the Calibration tab will change to a Certificate tab.
- You will still be able to edit the certificate by choosing the Certificate Tab and navigating down to "Edit Calibration Certificate."
- The tab will revert back to "Calibrate" after the period for the certificate ends.
Congratulations! You've created a calibration certificate.