ALTA wireless open/closed sensors provide information on the status of doors, windows, cabinets, etc. Know if a building or area is being accessed when it should not be, or if a door or window has been left open. Alerts can be setup to notify a user by SMS text, email or voice call if a door or window has been opened or left open.
ALTA wireless open/closed sensors provide information on the status of doors, windows, cabinets, etc. Know if a building or area is being accessed when it should not be, or if a door or window has been left open. Alerts can be setup to notify a user by SMS text, email or voice call if a door or window has been opened or left open.
ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,200+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.
Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.
Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.
Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
Magnetic Sensor Specifications |
|
Contact Rating | SPST, gold under -plating with Deactivated Rhodium outer-plating |
Switch Cycles | 50 million |
Operation Gap | Up to 3/4 inch |
Wire Leads | 22 gauge / 13.5 in length (± 1.5 in) |
Magnet | Alnico |
Magnet Case Construction | Weatherproof, high-impact ABS plastic with self-adhesive backing |
Magnet Temperature Range | -15°F to 160°F (-25°C to 70°C) |
Weight | 3.8 oz. |
Variation Specifications |
|
Security | Encrypt-RF® (256-bit key exchange and AES-128 CTR) |
ALTA Coin Cell Specifications |
|
Battery Type | Replaceable 3.0V (CR2032) Coin Cell Battery |
Dimension | 2.0 in x 1.125 in x 0.875 in |
Max Operating Temperature | -7°C to +60°C ( 20°F to +140°F ) |
Optimal Battery Operating Temperature (Coin Cell) | +10°C to +50°C ( +50°F to +122°F ) |
Supply Voltage | 2.0 - 3.8 VDC |
Battery Life | At 1 hour heartbeat setting, coin cell battery will last up to 4 years. ** |
Enclosure Technology | Monnit PinchPower™ Wireless Sensor Enclosures |
Enclosure Material | ABS |
ALTA 900 MHz Specifications |
|
Operating Frequency | 900 MHz Operating Frequency |
Certifications | Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-G2SC1) Complies with Industry Canada standards. (IC: 9794A-G2SC1) |
Device Range | Device Range Up to 1,200 ft. non-line-of-sight, wireless device range* |
Security | Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC) |