Description
The Power-over-Ethernet (PoE) Low-Temperature Sensor uses a glass-coated platinum RTD transducer to accurately measure temperatures from -200°C to +162°C (-328°F to 325°F). The Low-Temperature Sensor outputs the ambient temperature in degrees Celsius or Fahrenheit and alert the user when a temperature threshold has been crossed.
The Power-over-Ethernet (PoE) Sensor products measure various conditions (environmental, power, access). All devices come with flexible settings — including notifications, alerts, reports, and maps — can be customized in the iMonnit online sensor management interface.
No PoE infrastructure in your building? Plug the PoE•X Sensors into your Ethernet network and then power the sensors with the optional AC power supply.
Click here to view all Monnit Power over Ethernet Sensors.
Features
- Accurate to +/- 0.3°C @ 0°C.
- RTD temperature range: -200°C to +162°C (-328°F to +325°F)
- Good for extremely low temperature applications.
Data Snapshot
Low Temp - RTD / Thermistor Specifications |
|
| Sensing Element | DIN 43760 Class B |
| Thermal Time Constant | 15 sec max. |
| RTD Temperature Range | -200°C to +162°C (-328°F to +325°F) |
| RTD Accuracy at 0°C | +/- 3.3°C Standard (+/- 0.5°C Calibrated) |
| Weight | 3.7 oz. |
Variation Specifications |
|
| Hardware | 10 / 100 Ethernet Controller |
| Operation | Full- and Half-Duplex |
| Cross-Over Correction | Automatic MDI / MDI-X |
| Protocols Supported | DHCP, DNS, NTP, UDP, TCP, SNMP, Modbus TCP |
| Cable Connector | RJ45 |
| Device Memory | Up to 50,000 sensor messages; varies based on sensor type. (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored.) |
| Operating Temperature | -20 to +60°C (-4 to 140°F) |
| Storage Temperature: | -40 to +85°C (-40 to 185°F) |
| Accuracy @ 25°C | +/- 3.3° C Standard (+/- 0.5° C Calibrated) |
| Dissipation Constant @ 25°C | 2mW/°C |
| Data Rate | Auto configures to best rate for maximum range. |
| IEEE Standard Compliance | 802.3AF-2003 / 802.3AT-2009 Class 1 |
| Input Power | Supplementary Power Requirement |
| Response Time | 20 sec max |
| Lead Wire Length | Stainless steel metal probe tip (5mm diameter, 30mm length) (0.197 in. diameter, 1.18 in. length) |
Suggested Application Uses for This Sensor
- Environmental monitoring
- Smart machines and smart structures
- Cadaver storage cooler temperature monitoring
- HVAC system monitoring to detect failures or heating / cooling issues
