The PoE•X Water Detect Plus Sensor detects either the presence or absence of water. For example a leak-prone pipe within a facility. You may want to know when there is no water present, or you may need to know when the pipe begins leaking so it can be quickly repaired. This flexibility makes Monnit’s Water Detect Sensor the best way to monitor water presence in your environment. The sensor will remotely assess and regularly report on activity, instantly notifying you the moment change is detected.
The Power-over-Ethernet (PoE) Sensor products measure various conditions (environmental, power, access). All devices come with flexible settings — including notifications, alerts, reports, and maps — can be customized in the iMonnit online sensor management interface.
No PoE infrastructure in your building? Plug the PoE•X Sensors into your Ethernet network and then power the sensors with the optional AC power supply.
Click here to view all Monnit Power over Ethernet Sensors.
Wireless Water Detect Plus Sensor Specifications
|Detection Wires||High Impedance|
|Hardware||10 / 100 Ethernet Controller|
|Operation||Full- and Half-Duplex|
|Cross-Over Correction||Automatic MDI / MDI-X|
|Protocols Supported||DHCP, DNS, NTP, UDP, TCP, SNMP, Modbus TCP|
|Device Memory||Up to 50,000 sensor messages; varies based on sensor type. (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored.)|
|Operating Temperature||-20 to +60°C (-4 to 140°F)|
|Storage Temperature:||-40 to +85°C (-40 to 185°F)|
|IEEE Standard Compliance||802.3AF-2003 / 802.3AT-2009 Class 1|
|Input Power||Supplementary Power Requirement|
|Lead Wire Length||3 ft. (36 in.)|
|Weight||5.65 oz. (105 g) - with 3 ft. (0.91 m) lead|