• ALTA Wireless Voltage Detection - 200 VDC - Coin Cell Powered
ALTA Wireless Voltage Detection - 200 VDC - Coin Cell Powered

$99.00
Part #
MNS2-9-W1-VD-200
Region | Frequency
Not Selected - * Region Required
Product Variations
Quantity
Customize

Standard (Generation 1) Products

Product Description

The Monnit Voltage Detector - 200 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 200 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage".

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,200+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 12+ years.
ALTA products employ Monnit's new Encrypt-RF® Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.



What does this wireless sensor's data look like in software?

Wireless Voltage Detection - 200 VDC - Data View in Software

What's in the box?

  • Wireless Sensor
  • CR2032 - Coin Cell Battery
  • Mounting Hardware
 

Voltage Detection Sensor Specifications

Maximum Rated Input Voltage 200.0 Volts
Minimum Rated Input Voltage -200.0 Volts
Voltage Detection Threshold Present above ~2 VDC, Absent below ~1.8 VDC (Indeterminant from 1.8 to 2 VDC)
Trigger Transmits data upon state change
Open Circuit Reading Voltage absent
Response Time ~2 Seconds
Lead Wire Length 2 Wires, 1 ft (12 in), Red (+), Black (-), 22 AWG
 

ALTA Coin Cell Specifications

Battery Type Replaceable 3.0V (CR2032) Coin Cell Battery
Dimension 2.0 in x 1.125 in x 0.875 in
Max Operating Temperature -7°C to +60°C ( 20°F to +140°F )
Optimal Battery Operating Temperature (Coin Cell) +10°C to +50°C ( +50°F to +122°F )
Supply Voltage 2.0 - 3.8 VDC
Battery Life At 1 hour heartbeat setting, coin cell battery will last up to 4 years. **
Enclosure Technology Monnit PinchPower™ Wireless Sensor Enclosures
Enclosure Material ABS
 

ALTA 900 MHz Specifications

Operating Frequency 900 MHz Operating Frequency
Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-G2SC1)
Complies with Industry Canada standards. (IC: 9794A-G2SC1)
Device Range Device Range Up to 1,200 ft. non-line-of-sight, wireless device range*
Security Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)
Specifications Image

Suggested Application Uses for This Sensor

  • Appliance monitoring
  • Sprinkler system monitoring
  • HVAC system monitoring
  • Line power monitoring
  • Power coupling monitoring
  • Power supply monitoring
  • Sump pump monitoring