The Monnit Voltage Detector - 200 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 200 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage".
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
Voltage Detection Sensor Specifications
|Maximum Rated Input Voltage||200.0 Volts|
|Minimum Rated Input Voltage||-200.0 Volts|
|Voltage Detection Threshold||Present above ~2 VDC, Absent below ~1.8 VDC (Indeterminant from 1.8 to 2 VDC)|
|Trigger||Transmits data upon state change|
|Open Circuit Reading||Voltage absent|
|Response Time||~2 Seconds|
|Lead Wire Length||2 Wires, 1 ft (12 in), Red (+), Black (-), 22 AWG|
ALTA Coin Cell Specifications
|Battery Type||Replaceable 3.0V (CR2032) Coin Cell Battery|
|Dimension||2.0 in x 1.125 in x 0.875 in|
|Max Operating Temperature||-7°C to +60°C ( 20°F to +140°F )|
|Optimal Battery Operating Temperature (Coin Cell)||+10°C to +50°C ( +50°F to +122°F )|
|Supply Voltage||2.0 - 3.8 VDC|
|Battery Life||At 1 hour heartbeat setting, coin cell battery will last up to 4 years. **|
|Enclosure Technology||Monnit PinchPower™ Wireless Sensor Enclosures|
ALTA 868 MHz Specifications
|Operating Frequency||868 MHz Operating Frequency|
|Certifications||CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.|
|Security||Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)|
|Device Range||Device Range Up to 1,200 ft. non-line-of-sight, wireless device range*|