Monnit's new Wireless Serial Data Bridge is a bidirectional serial to radio device capable of transmitting serial data over its wireless communication link and delivering wireless data, received in the radio, out of its serial port. The Monnit wireless serial data bridge can be connected to any device equipped with a serial data port to capture the data and transmit it to the iMonnit online sensor monitoring and Notification System. The data is stored in the online system and can be reviewed and exported as a data sheet or graph.
Note: Interface type must be selected at time of purchase. Available for RS232 or RS485 serial interfaces. Requires a MonnitLink wireless gateway for communication with software.
Serial Data Bridge Specifications
|Supply Voltage||Requires 5 Volt Power via Serial Port or External Source.|
|Current Consumption||RS232: 38.9 mA | RS485: 51.2 mA|
|Operating Temperature||-40°C to +85°C (-40°F to +185°F)|
|Supported Baudrates||1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400|
|Parity||None, Odd, Even|
|Stop Bits||1 or 2|
|Packet Side per Radio Transmission||8 to 24 bytes|
|Max Bandwidth||1 Packet/Second (Max Packet Size – 24 bytes)|
|Serial Buffer||1280 bytes (If this buffer overflows the receiver will disable until the buffer empties)|
433 MHz Specifications
|Operating Frequency||433 MHz Operating Frequency|
|Certifications||CE Certified and Complies with CISPR 22:2008-09 / EN 55022:2010 - Class B and ETSI EN 300 220-2 V2.4.1 (2012-05)|